General Care and Safety Guide
SAFETY FEATURE
In case of overheating, this heater is fitted with a
thermal fuse which is located inside the
construction of the heater. If this thermal fuse
activates it will turn the heater off however the
light in the power switch will remain on to let you
know there is still power going into the heater.
In the event that this happens, turn the heater off
at the switch and the wall socket and unplug it.
Then contact our Customer Service team.
WARNING: Do not use this heater with a
separate programmer, timer, separate
remote-control system or any other device
that switches the heater on automatically,
since a fire risk exists if the heater is covered
or positioned incorrectly.
CARE AND CLEANING
Do not attempt to dismantle the Panel Heater.
There are no user serviceable parts. For service
or repair, contact an authorised electrical service
technician.
Unplug the heater from the mains supply before
cleaning. Ensure that the heater has been
allowed to cool down completely before
cleaning.
To remove the unit from the wall, simply remove
the bolt caps, unscrew the bolts with a screw
driver and then take the heater down. Use a
vacuum cleaner to remove dust and fluff from
behind the heater.
The outside can be cleaned by wiping it over
with a soft dry cloth.
NOTE: Do not use abrasive cleaning agents or
polish, this can damage the surface and finish.
For short term non-use, simply turn off the unit
with the power switch on the side of the heater
and disconnect the mains power supply at the
wall.
SUPPORT AND TECHNICAL ADVICE
PO Box 100707, NSMC, Auckland, New Zealand
Monday – Friday 8am-5pm
Phone: 0800 232 633
Website: www.goldair.co.nz
CAUTION
This heater generates heat during use. Proper
precautions must be taken to prevent the risk of
burns, scalds, fires or other damage to persons.
PROOF OF PURCHASE
To receive warranty retain receipt as proof of
purchase. (Refer to back of booklet).
