1.
Mark the positions of the four holes to be
drilled on the wall. Ensure there is a
300mm clearance on all sides of the
heater.
2.
Drill holes with an appropriate drill bit for
the wall surface you are mounting the
heater on to.
3.
Insert the plastic rail fittings into the holes.
4.
Install the Panel Heater onto the four rail
fittings matching the four holes on the heater.
5.
Screw the four screw bolts into the plastic rail
fittings.
6.
Put the caps onto the end of the screw bolts.
It is recommended to use some normal glue
to stick the caps onto the bolts steadily.
Wall Mounting Position Instructions
Always choose a safe location for the heater, keeping in mind the safety
precautions outlined. Ensure all packaging and wall mounting
accessories pack has been removed from the unit before use.
To remove the unit from the wall, simply remove the bolt caps, unscrew the bolts with a screw driver
and take the heater down.
