OWNER’S MANUAL
STEP
21
ASSEMBLING TURNTABLE TOP PLINTH
[Motor]
STEP 21-5
With the help of the 5mm Allen wrench located
in the layer
B6
position
6
, thread the Motor
Allen Screws with Nylon Washers into
the slots as shown in the picture
aside.
STEP 21-6
Set up the Motor quite well centered into
the holes of the Turntable Top Plinth
as shown in the picture
STEP 21-7
The Motor Allen Screws must be thigtened for
blocking the Motor Cylinder firmly.
page 38
