OWNER’S MANUAL
page 57
POWER ADAPTER & SPEED CONTROL
TURNTABLE
SPEED
CONTROL
ADJUSTMENT
:
•
LEFT BUTTON
Select
33
⅓ & 45
rpm. Only when the turntable is in STOP mode.
•
RIGHT BUTTON
Start
and
Stop
the
33
⅓
rpm
and
the
45
rpm
speed
.
PITCH CONTROL MODE
While the turtable plays 33
⅓
or 45rpm, enter the
PITCH CONTROL MODE
pressing and holding for
3/4
seconds the
LEFT BUTTON
and
the
RIGHT BUTTON
buttons together while the display shows
PITCH
.
With the help of the supplied stroboscope the unit is ready to adjust the fine speed both 33
⅓
or 45rpm.
• PITCH
–
pressing in sequence the
LEFT BUTTON
button to slowly decrease the speed.
• PITCH +
pressing in sequence the
RIGHT BUTTON
button to slowly increase the speed.
To get out
the
PITCH CONTROL MODE
press and hold for
3/4
seconds both the
LEFT BUTTON
and
the
RIGHT BUTTON
buttons together while the display will show back the selected speed.
PLEASE NOTE: the fine speed is stored into the turtable flash memory, permanently, even without power.
SPEED 33
PLAY
LEFT BUTTON
RIGHT BUTTON
Power Cord IEC plug
Plug the Power Cord via the IEC plug of the
power supply of the turntable located as
shown in the picture here below
