OWNER’S MANUAL
STEP
21
ASSEMBLING TURNTABLE TOP PLINTH
[Motor]
STEP 21-1
Insert the Motor cable with mini XLR connectors
into the Cable Pipe as shown in the picture aside
STEP 21-2
Once the Motor cable is released from the bottom
plinth of the Turntable Stand Structure, plug the
Mini XLR connector into the power supply box as
shown in the picture aside.
Motor Cylinder completed with motor Pulley (1x) located in
A1
position
3
For the
STEP 19
you need these parts:
Motor Allen Screws with Nylon Washers (2x ea.) available
inside the bag marked
SL02
located in
B6
position
6
Motor cable with mini XLR connectors (1x) available inside the bag
marked
SL02
located in
B6
position
5
+
page 36
