ReadyPop
®
Jr.
Model No.: 2783-00-000 (010, 020, 030)
Page 6
gmpopcorn.com
Setup
This unit has been tested at the factory.
1.
Remove all packaging and tape prior to operation—remove any protective covering
on the plastic panels. Remove accessories and carefully remove kettle packed in
cabinet interior.
2.
Place unit on a sturdy, level countertop or base.
3.
Unit has 4 glide feet preinstalled at the factory (Figure A). Install a Black Crutch Tip on
each foot. Firmly push crutch tip over glide until it covers glide entirely.
4.
Tilt kettle and insert into hanger arms, then allow kettle to return naturally to an
upright position (Figure B).
5.
Plug kettle lead into receptacle located on ceiling of cabinet interior. Align keyed or hook
shaped prong with the correct opening, then push plug all the way in and twist or rotate
to lock in place.
To unplug,
untwist kettle plug before attempting to pull from receptacle.
6.
Doorknobs are shipped in accessories pack. Install a knob with tee bolt on the LH
popper door. Install the door bracket and knob on the RH door (Figure C). The door
brackets can be locked to help prevent product tampering (lock to be provided by
customer). Install knob with screw on old maid pan.
Black Crutch Tip
Glide
(pre-installed
at the factory).
Kettle shown mounted
in hanger arms.
Kettle lead plugged in.
1. Align prongs with
receptacle.
2. Insert plug fully.
3. Twist plug to lock
into receptacle.
Door Lock
Brackets
Figure A
Figure B
Figure C
Tab holds LH
door closed.
Install
plate
on RH door.
Screw on
knob
to hold plate.
