ReadyPop
®
Jr.
Model No.: 2783-00-000 (010, 020, 030)
Page 15
gmpopcorn.com
Issue
Possible Cause
Solution
No Popcorn Dispensed
A.
Dispense Button/Motor
A.
Make sure the unit is plugged in to supply
power to the Dispense Button. Check if the
Dispense Button LED is ON. If the LED is ON,
and popcorn does not dispense when the
button is pushed, the button or the motor
may be faulty, contact qualified service
personnel for inspection/repair.
B.
Coil Assembly not
installed correctly
B.
Coil Assembly not installed correctly,
reference Initial Setup section for instructions
to properly install coil assembly on motor
shaft.
C.
Dispense Chute
C.
Make sure the dispense chute opens freely to
allow coil assembly to dispense popcorn.
