Pop-O-Gold
http://www.gmpopcorn.com
Page 4
INSTALLATION INSTRUCTIONS
INSPECTION OF SHIPMENT
After unpacking, check thoroughly for any damage which may have occurred in transit. Claims should be
filed immediately with the transportation company. The warranty does not cover damage that occurs in
transit, or damage caused by abuse, or consequential damage due to the operation of this machine, since
it is beyond our control (reference warranty in back of manual).
Manual
Read and understand the operator’s manual and all other safety instructions before using this equipment.
To order copies of the operator’s manual go to gmpopcorn.com or write to Gold Medal Products Co.,
10700 Medallion Drive, Cincinnati, OH 45241 USA 1-(800)-543-0862.
ELECTRICAL REQUIREMENTS
DOMESTIC MODELS ONLY: 120/208 or 120/240 V 5752 W, 60 Hz
This unit is designed to operate on single phase, 30 AMP, 4 wire supply, 120/208 or 120/240 V~ (2 Hot,
1 Neutral, 1 Ground). All electrical components in this machine are 120 V (motors, heat elements, lights,
etc.) and therefore require “Hot to Neutral” connection (NOT “Hot to Hot”). A wall receptacle is supplied
with the machine. This receptacle will accept the attachment plug on the machine and must be used.
FIRE SUPPRESION MODELS
If equipped, fire suppression components are in accordance with ANSUL R-102 specifications. The fire
suppression system is shipped empty; the machine will not operate until the system is charged and
inspected by a local ANSUL representative. System charging is not performed by
Gold Medal®
Products.
Contact
Gold Medal®
Products Technical Support with any questions regarding the fire suppression
system. Service and maintenance of the fire suppression system must be performed by an ANSUL certified
technician.
Installation, maintenance, and testing of the Fire Suppression System and its components must be
performed by an authorized Ansul representative. Performance of these tasks by personnel not
authorized by Ansul voids all warranties and may render the fire suppression system inoperable.
