Popcorn Topping Dispenser
and Base
Model Series 2396 and 2495
Page 16
gmpopcorn.com
3.
Nozzle is designed to be drip free. Butter flavored topping can accumulate and cause
the nozzle to clog.
If nozzle becomes clogged, use a paperclip or small diameter rod to clear the opening
(3/32
” hole)
.
4.
Disconnect Universal Bag Connector from topping bag and connect it to cleaning
bracket as shown below.
Make sure the plunger is engaged on pin.
5.
Place hose with cleaning bracket into pail of sanitizing solution.
6.
Place an empty pail under dispensing nozzle to receive cleaning solution pumped
through unit.
7.
Use a dispense button to dispense solution until tubes are clean and free of topping.
8.
When pumping is complete, discard dirty solution, clean the pail, and refill with clean
hot water.
9.
Remove hose with bracket from solution pail and place it in the hot water.
10.
Place an empty pail under nozzle.
11.
Use a dispense button to dispense hot water until tubes are cleared of sanitizer.
12.
When cleansing is complete, remove pail from dispenser.
13.
Remove hose with bracket from hot water, disconnect bracket, and wipe hose and bag
connector dry.
14.
Reconnect dispenser to bag of topping.
15.
Purge and prime the lines
—
hold a measuring cup (or medium sized container) under
nozzle and press a dispense button until all water has been purged and tubes are
primed with topping. After cleaning, always discard the topping dispensed in priming.
16.
Sanitize cleaning items for next use.
Cleaning
Bracket
Push
Plunger IN
to
lock onto bracket.
Plunger OUT
in
open position.
Step 1:
Step 2:
Slide Connector
onto Bracket
Step 3:
Plunger
ENGAGED
on pin.
