Fudge Cooker/Mixer
Model No. 2183-00-000
Page 5
gmpopcorn.com
Setup
1.
Remove all packaging and tape, and accessories before starting operation.
2.
This unit must be properly fastened to a sturdy counter, see illustration below for counter
mounting requirements.
3.
The unit is shipped from the factory with the fudge paddle installed and secured in place
with a wing bolt lock stud.
4.
After setup, the unit should be cleaned prior to use (see Care and Cleaning section of this
manual).
5/16-18
Grade 5 Nut
2” Dia. X 1/8” Thick
Fender Washer
5/16-18
Grade 5 Bolt
3/16” Minimum
Thickness for
Stainless Steel
Over Wood
3/4” Minimum
for Wood or
Wood Plastic
Products
6.50”
12.375”
3” Minimum Clearance
Between Kettle and Wall
2.00”
4 Holes for
5/16” Dia. Bolts
14.375”
10.525”
23.625”
36.25”
16.248”
6” Recommended Min. Clearance
between wall and Cntl Box for Service.
16.00”
8.625”
3” Minimum Clearance
between Kettle and Wall.
Counter Mounting Requirements
3” Minimum Clearance
Between Kettle and Wall
4 Holes for
5/16” Dia. Bolts
6 .50”
2.00”
12.375”
14.375”
2” Dia. X 1/8” Thick
Fender Washer
3/4” Minimum
for Wood or
Wood Plastic
Products
5/16-18
Grade 5 Bolt
3/16” Minimum
Thickness for
Stainless Steel
Over Wood
6” Recommended Min. Clearance
between wall and Cntl Box for Service.
36.25”
16.248”
23.625”
5/16-18
Grade 5 Nut
10.525”
8.625”
16.00”
3” Minimum Clearance
Between Kettle and Wall
