Fudge Cooker/Mixer
Model No. 2183-00-000
Page 8
gmpopcorn.com
OPERATING INSTRUCTIONS
Controls and Their Functions
HEAT/MOTOR SWITCH
Two position, ON/OFF lighted rocker switch – provides power to the heating elements in
the bottom of the kettle, and powers the mixing motor to turn for an allotted amount of
time depending on what mode the unit is in. The green switch light ON indicates there is
power to these features.
Note:
It is normal for the mixing motor to stop for an allotted amount of time every
minute (see Operate/Clean Switch description).
MOTOR ONLY SWITCH
Two position, ON/OFF lighted rocker switch – provides power to the mixing motor to run
continuously. This switch is only needed if the intermittent Heat/Motor Switch is not
providing the desired fudge texture during mixing or desired cleaning results.
OPERATE/CLEAN SWITCH
Two position, toggle switch – determines the set point and timer setting for Operate
mode, and Clean mode.
Operate Mode:
For making fudge, in Operate mode the set point temperature is 185°F,
and the mixing timing is factory set to turn ON for 55 seconds of every minute;
then turn OFF for 5 seconds of every minute (when the Motor Only Switch is OFF).
Clean Mode:
DO NOT attempt to make fudge in the Clean mode.
In Clean mode, the set
point temperature is higher (230°F), and the mixing timing is factory set to turn
ON for 30 seconds of every minute; then turn OFF for 30 seconds of every minute
(when the Motor Only Switch is OFF).
CIRCUIT BREAKER
The Circuit Breaker protects the Mixing Motor and Heat Control from an overload condition.
Control Panel View
Heat/Motor
Switch
Motor Only
Switch
Digital Heat
Control
Circuit
Breaker
Operate/Clean
Switch
Kettle Dump
Handle
2 Position
Bracket
(holds unit in
half-tilt position)
