Golander
BT103S Manual
11
3) There should be more than 200 mm space for the back of
the pump when it is running.
7.2
Power Connection
The voltage of the power supply should be marked on the sticker of
the pump. Please make sure to use the right power source for the
pump. Please plug the power cord into the IEC Power Connector
on the rear of the pump and plug the opposite end of the power cord
into an electrical outlet. Flip the power switch located on the rear of
the pump.
7.3
Change Control Mode
Turn on the power switch. The display will show welcome message
then show the main screen. Press the
MODE
key to
change the
working mode (
).
Int
32.5rpm
ExtV
32.5rpm
Disp
32.5rpm
Lev1
32.5rpm
Lev2
32.5rpm
Figure 10. Change Working Mode
