Golander
BT103S Manual
9
Note 1
. Run Time Unit: Time unit for the dispense duration of
Time Dispense mode. The unit can be in days, hours, minutes
or seconds.
Note 2.
Disp Time: Dispense time for Time Dispense mode. It
is the dispense duration for each dose. The range is 0.1-999
seconds/minutes/hours/days.
Note 3.
Pause Time Unit: Time unit for the interval time of Time
Dispense mode. The unit can be in days, hours, minutes or
seconds.
Note 4.
Pause time for dispense mode. It is the interval time
between doses when the number of cycles setting is more than
1. The range is 0.1-999 seconds/minutes/hours/days.
Note 5.
Cycle: Number of cycles for Time Dispense mode. The
range is 0-999 cycles. If it is set to 0, the dispense process will
keep running until
START/STOP
is pressed, otherwise, pump
will stop when it finishes dispensing the set number of cycles
(
Note 6.
Reverse Angle: To minimize the drip after a dispense,
the drive can reverse direction to draw the fluid back at the end
of the tubing. The reverse angle range is 0-720 degrees. When
it set to 0, the anti-drip function is disabled.
Note 7.
Max Speed: Maximum speed for External Control mode.
It is the maximum speed that the external analog signal can
control.
Note 8.
Pump No: It is the pump communication address for
communication mode. When the number is changed, please
restart pump to apply the setting.
Note 9.
Beep Setting: Set the key tone on or off.
Note 10.
Language: System language setting, English or
Chinese.
Note 11.
WIFI Reset: Reset WIFI to link the drive to APP.
Note 12
.
Contrast: LCD backlight contrast setting.
Note 13
.
Reset hose life: after replacing the new hose, the hose
life needs to be reset and the hose life will be recounted.
