SmartBox
®
1 / SmartBox
®
2 / SmartBox
®
3
part no. 28 100 57 f
11 / 20
Menu
Input function
Input value
4.Tank
volume
Adjust the tank volume with [+] / [-] (100%). The default
setting is 0 L. The value must be set.
___________L
Please see a volume table for the highest value,
if available. For a 100 m³ cyl. buried tank, this
may for example be the value 100600 litres.
5.Tank
height
Enter inner tank height in millimetres: e. g.: 249 cm
(max. value = 999,9 cm) (height without dome)
_________mm
Please see a volume table for the highest value,
if available. For a 100 m³ cyl. buried tank, this
may for example be the value 288 cm.
5b.Filling
limit
Set the filling limit of the tank with [+]/ [-]:
With fuel oil tanks, that is the shut-off point of the limit
indicator. The default setting is 95%.
e.g. 95%=237cm. For tanks which can be filled to the
very top (e.g. water tanks), it is necessary to set the
highest value of 99%.
__________%
6.View
In the 1st line of the display, the tank name/medium and
contents are displayed (e.g. in litres).
The display in the 2nd line can be selected:
____________
View details
FiPercent
a)
FiLevel
b)
Level
c)
For fuel oil tanks in Germany, a free capacity display is
required according to TRwS 791-2. This is possible with
selection a) and b).
Steps 7 is only required for SmartBox
®
2 and SmartBox
®
3.
Entering incorrect switching points and mixing up the switch-on and shut-off
point can lead to the overfilling of the tank or the dry running of a pump!
Menu
Input function
Input value
7.Relay
7.Relay 1
SmartBox 2
or
7.Beeper
acoustic
alarm
SmartBox 3
Switch function of relay 1 or beeper (acoustic alarm):
on ______%
off ______%
on ______°C
off ______°C
Deactive
The relay does not switch
Active
The relay switches
Example of switch point setting for Active (with
hysteresis):
Enter switching points as % values from 01-99 (and/or
enter as °C value from -99 to +99 only for probe
with
temperature measurement
)
Deactive
activate with [+] / [-] to
Active
press Enter to confirm
Switch-on 10%
set with [+] / [-]
[Enter]
Switch-off 12%
set with [+] / [-]
[Enter]
Switch-on +0°C
set with [+] / [-]
[Enter]
Switch-off +0°C
set with [+] / [-]
[Enter]
Deactivate
the relay or beeperr via
Deactive
or input
of
0%
or
0°C
(for Switch-on and -off).
