DESIGN
Inlet connector; Outlet connector quick coupler SKU with protective
cap
Knurled gripping surface
ADVANTAGES AND EQUIPMENT
•
w
ith protective cap to protect against contamination
•
t
he gas flow will be shut-off during decoupling
•
u
se only the standardised plug-in fitting STN for the connection with the hose line
•
a
special device makes the quick coupler SKU tamper-proof – decoupling is only possible
with the plug-in fitting STN
•
q
uick coupler SKU made of brass or stainless steel
•
q
uick coupler SKU made of stainless steel with viton seal, is particularly suited to
use in an aggressive atmosphere, e.g. animal breeding
•
A
pproval: DVGW tested, registration number can be found on the product
ASSEMBLY
Escaping liquid petroleum gas (category 1):
•
is highly flammable
•
may cause explosions
•
severe burns in case of direct skin contact
Regularly check connections for leak-tightness
!
If you smell gas or detect a leak, shut the
LPG
system down immediately
!
Keep ignition sources and electrical devices out of reach
!
Observe applicable laws and regulations
!
Before assembly, check that the product is complete and has not suffered any damage during
transport.
ASSEMBLY must be carried out by a specialised company
!
The specialised company
,
the operator
and users
must observe, comply with and
understand all of the following instructions in this assembly and operating manual. For the
system to function as intended, it must be installed professionally in compliance with the
technical rules applicable to the planning, construction and operation of the entire system.
Risk of injuries due to blown-out metal chips!
Metal chips may cause eye injuries.
Wear safety goggles!
Malfunctions caused by residues!
Proper functioning is not guaranteed.
Visually check that there are no metal chips or other residues in the connections! It
is important that metal chips or other residues are
carefully
blown out!
