Double
‐
stage tank regulator PS 25 bar
11 / 16
During installation make sure that the withdrawal valve and the piping are aligned. Do not
install the tank regulator under tension. We recommend the "regulator support for CE tanks",
Part no. 02 510 40.
To install the connections, see CONNECTIONS in the assembly manual.
For outdoor applications, the product must be located or protected so that no
dripping water can enter. We recommend installation in under a hood and in a control cabinet,
respectively, or in a housing.
Risk of asphyxiation from gas leaks in enclosed spaces.
High concentrations of gas can cause difficulty in breathing and lead to
unconsciousness.
A discharge line must be connected from the breather on the
product to outdoors.
For installation in a dome, we recommend:
Installation of ventilation set (Part No. 02 063 10).
Prevents water getting into the pressure regulator.
For installation on an underground gas tank with long welding sleeve, use the regulator
support for CE tanks (Part No. 02 510 40).
Suitable for all GOK tank regulators.
Suitable for retrofitting.
Install the regulator at an angle to the breather
We recommend that you install the pressure regulator
type BHK 052
and
type BHK 052B
at
an angle to the breather + . This allows condensation to flow away better.
