Gogen WT57, User Manual, Page: 40 / 52

ENG - 40
dual-Watch-monitor the current channel plus one other at the same time.
1. Press the MENU button seven times. DCM appears on the display while „OF „ is
flashing.
2. Select the desired 2nd channel by pressing ▲ or▼ button.
3. Press the MENU button to change the CTCSS code.
4. Press ▲ or ▼ button to select the desired CTCSS code.
5. Press the PTT button to confirm the setting.
The display switches backwards and forwards between the two channels. If the handset detects
a signal on either channel, it will stop and receive it. As long as the unit is in Dual watch mode,
DCM is shown steadily on the display.
To end the dual Watch mode
1. Press the
MENU
button
seven
times.
The channel number flashes on the display.
2. Press the ▲ and ▼ button until „OF „ is shown on the display.
3. Press the PTT button to exit from the Dual Watch mode.
scanning Channels
When the Scan function is turned on, the handset will continuously scan through all eight chan -
nels and all 38 sub-channels until it finds one on which another user is transmitting.
1. Press MENU and the ▲ buttons at the same time. SCAN appears on the display,
and the channel number changes. When a signal is detected, the unit will pause.
2. Press the ▲ button to continue scanning 1 to 8channel.
3. Press the ▼ button to scan the Sub-channels.
4. Press the PTT button to stop the scan and communicate or ▼ button to
continue scan.