Gogen WT57, User Manual, Page: 38 / 52

ENG - 38
VOX (voice activated transmission) mode
In VOX mode your handset will transmit whenever it detects your voice (or other noise) without
the PTT button having to be pressed. It will transmit for 2 seconds even if you stop talking.
The level of VOX sensitivity is shown by Numbers on the display. At the highest level, the hand -
set will pickup softer noise(including background noise); at the lowest level, it will pick up only
quite loud noise.
To turn VOX mode On and Off:
1. Press the MENU button Three times VOX icon is displayed and OF flashes on the
LCD panel.
2. Press the ▲ button to set the level of sensitivity.(3 maximum) If you press the
▼ button until OF appears on the display, vox is turned off.
3. Press the PTT button to confirm the setting. As long as the handset is in VOX
mode, VOX is shown steadily on the display.
ring tone
You can send ring tone to other handsets within range and tuned to the same channel,(and sub-
channel if applicable), to alert them you want to communicate with them.
Press and release the
Call button
You will hear a ring tone for about two seconds, while the transmitting symbol ( )
appears on the LCD panel. Any other handset within range and tuned to the same chan -
nel will hear Ring tone, and may decide to transmit to you.
selecting Call-ring tones
1. Press the MENU button four times, the unit will enter Call-Ring setting mode. The
LCD will display while 1 is flashing.
2. Press the ▲ or ▼ button to change the Call-Ring tone. (5 different tones) , the
different Call-Ring tones can be heard during changing.
3. Press the PTT button to confirm your setting after you select your desired
Call-Tone.