EN
EN - 73
Port settings should be as follows:
Bits per second : 115200
Data Bits : 8
Parity : None
Stop bits : 1
Flow control : None
7. Now Hyper Terminal connection is established. From “Transfer” menu, choose “Send File”.
8. Enter file name to be sent.
9. Choose Xmodem1K as protocol type.
10. Press the Send button and reset your receiver. You will see the progress on the PC screen.
11. Wait for the transfer to be completed. Then, disconnect and exit from Hyper Terminal window.
12. Receiver will automatically start to operate
9. NOTES
POWER:
The receiver should be plugged into a 220-240 V AC 50Hz supply only.
LEADS:
Ensure the power supply lead, and all other leads, are positioned so they are not likely
to be walked on or pinched by things placed on or against them. Pay particular attention to
the power lead, where it enters the mains plug and where it comes out of the receiver. Do not
connect or adjust leads when the receiver is plugged in.
TEMPERATURE AND MOISTURE:
Do not leave or use the receiver in a hot, cold or humid area.
Do not allow the receiver to get wet - from drips or splashes - as this may be dangerous. Do
not place water-filled objects such as flower vases, on top of the receiver.
VENTILATION:
Slots and openings in the receiver‘s cover are for ventilation. Do not cover or
block them as this could lead to overheating.
CLEANING:
Unplug the receiver before it is cleaned. Use a lightly dampened cloth only. Do not
use liquid or aerosol cleaners.
HEAT AND FLAMES:
The receiver should not be placed near to naked flames or sources of
intense heat, such as an electric fire. Ensure that no naked flames sources, such as lighted
candles, are placed on top of the Receiver.
LIGHTNING:
Unplug your receiver from the wall socket if there is a storm or lightning, or if it is to
be unused for a long time.
REPLACEMENT PARTS:
If your receiver needs a replacement part, ensure the person undertaki
-
ng the repair uses parts which are specified by the manufacturer or have the same specificati
-
ons as the original part. Other parts may cause a fire, electric shock or other hazards.
BATTERY DISPOSAL:
Please ensure that exhausted batteries from the remote control handset
are disposed of safely.
SERVICING:
Ensure the person who services your receiver is qualified to do so. Do not remove
the cover yourself you could get an electricshock.We are proud to offer a high-quality product.
To keep this level of quality, your receiver should be serviced at an authorised service centre.
Summary of Contents for PVR3050
Page 77: ...Poznámky Notes ...
Page 78: ...Poznámky Notes ...
Page 79: ...EN 79 Poznámky Notes ...
Page 80: ...EN 80 ...
