EN - 66
5.2. CONFIGURATION
You can configure the settings of your set top box. Select
Configuration from Setup menu and press OK to enter this
menu. Press the BACK button on the remote to exit
5.2.1. TV TYPE
Digital terrestrial television channels can broadcast pro
-
grammes in a widescreen format which must be output
differently to normal and widescreen TV sets. This
function tells the receiver the screen format of the TV
connected so that broadcasts are displayed correctly.Highlight the TV Type line in the Configu
-
ration menu and use the“
/
keys to select 4:3 if you have a standard TV set
connected or 16:9 if it is a widescreen TV. This function duplicates the selection made at the
time of first installation and can be used if you change TV sets.
5.2.2. TV OUT
The receiver can output RGB , CVBS and S-Video signal from the TV SCART on the rear
panel. Although the RGB format results in a better quality picture, not all equipment can cope
with an RGB signal.
5.2.3. VCR OUT
This allows you to select CVBS or S-Video output from the VCR SCART socket.The receiver
can output SVideo and CVBS signal from the VCR SCART on the rear panel. Supports scart
transparency (e.g. analogue decoder).
5.2.4. AC3 AUDIO
Use the
/
buttons to go to the AC3 Audio option. Use the
/
buttons to toggle between
ON and OFF. If you choose ON and you select a broadcasting with AC3 audio, the default
audio output will be AC3, but if you choose OFF, the audio output will be PCM Stereo. Note
that you need a digital audio amplifier with AC3 support connected to Digital optical output, to
experience AC3 audio.
5.2.5. FAVOURITE MODE
This function enables or disables the 5 favourite channel list mode by pressing
/
buttons
and press OK . IF a favourites list exists it will switch to the list number selected. If there is no
favourite listing, a warning message is displayed.
5.2.6. CHANNEL LIST
Use
/
buttons to go to Channel List option. Use
/
buttons to toggle Channel List Mode.
If you select “TV Only”, with the PR+/PR- buttons, you navigate through only TV channels. If
you select ”Radio Only”, with the PR+/PR- buttons, you navigate through only radio channels.
If you choose “Show All” all, channels can be navigated with the PR+/PR- buttons. To save the
recent changes and exit; press the MENU button.
Summary of Contents for PVR3050
Page 77: ...Poznámky Notes ...
Page 78: ...Poznámky Notes ...
Page 79: ...EN 79 Poznámky Notes ...
Page 80: ...EN 80 ...
