4) Open the WiFi settings on your smartphone and look for the SSID “GoFish Cam”
and select it
5) Enter the password “1234567890”
6) When the connection is complete, the indicator light on your GoFish Cam will
stop blinking and remain steady orange.
Figure 5
●
To terminate the Wi-Fi connection
○
Press Wi-Fi button and remove your finger.
■
The Wi-Fi indicator light will turn off
❏
Change the default SSID and Password using the "GoFish Cam App" after entering them for the first time.
Visit the settings icon when in live stream view in camera mode.
❏
Wi-Fi mode and Wi-Fi indicator light will turn off if this unit cannot be connected with the smartphone in
approx. 5 minutes. Retry the connection setting from the Step 1.
❏
If this unit and the smartphone are too far apart from each other when making the settings, the connection
may not be established. Move the devices closer to each other before making the settings.
❏
Even if you have changed the SSID/password, the default SSID/password are restored when you reset or
format the network settings. We recommend you keep this owner’s manual in a safe place.
❏
Transmission speed may decrease, or may not be usable depending on the environment it is used in.
❏
The connection between this unit and the smartphone may be interrupted temporarily depending on radio
wave conditions. An attempt to reconnect is made automatically when radio wave interference, etc. is
eliminated.
❏
Note: Water will interrupt radio wave communications, therefore this unit, when submerged underwater will
not live stream to a smartphone or any other device. Live stream is only available when properly using the
GoFish Cam Float Accessory.