Charging the battery
When this unit is purchased, the battery is not charged. Charge the battery fully before using
this unit for the first time.
●
This unit has a built-in rechargeable lithium-ion battery. Do not ever remove or attempt to
remove this unit’s batteries. If you need to dispose of your GoFish Cam, please send it
back to GoFish Cam so we can properly dispose of it..
●
It is recommended to charge the battery in a temperature between 10
°
C and 30
°
C (50F
and 86F).
●
When this unit is turned on, it takes longer than usual to charge the battery.
Figure 3
1) Rotate and remove the rear cap to remove it, see page 8 for removal instructions.
2) Connect the USB cable (provided) to the GoFish Cam and connect the other end to a
Wall Outlet or a PC. The left indicator light on the back of the unit will turn red to indicate
that it is charging. Once the unit is completely charged the charging light will turn off.
3) Once charging is complete, disconnect the USB cable from the GoFish Cam and replace
the rear cap, see page 8 for removal instructions. Make sure the cap is tightened
completely so that water cannot enter the camera.