gofanco Matrix88-HDBT, User Manual

Page: 6 / 40

6
Figure 3: HDBaseT Receiver Layout
HDBaseT Receiver
No. Name Description
1 Power LED Red when powered on
2 ARC Mode
Press the button with a paper clip or other
sharp object to enable ARC mode, the left
LED will light up blue. Press it again to
exit ARC Mode the LED will go off.
3 ARC Audio In
Toslink connector to connect your ARC
audio source device
4 Firmware Micro USB port for firmware upgrade
5 HDMI Out Connects to your HDMI display
6 Audio Breakout
Toslink connector transmits HDMI source
audio de-embedding.
Note : This port has
no audio output if ARC Mode is On
7 IR In Connects to IR Receiver cable
8 IR Out Connects to IR Emitter cable
9 RS232
Connects to RS232 control device (e.g.
PC) or a third party device
10 HDBT In
Connects to the Matrix's HDBT Out using a
Cat cable
11 Power Jack
Connects to the included power adapter. If
the Matrix is powered, this connection is
not needed, the Receiver will power on
using PoC technology through the Cat
cable