gofanco Matrix88-HDBT, User Manual

Page: 5 / 40

5
Figure 2: HDBaseT 8x8 Matrix Rear Panel Layout
1- No. Name Description
1 HDMI Inputs Connects to your HDMI source devices
2 Outputs
HDBT (1-6) : Connects to the included HDBaseT
Receiver(s) using CAT cables
HDMI (7-8) : Connects to HDMI display(s) using
HDMI cables
3 IR OUT
1-8 : Connects to IR emitter cable(s) to control
your source device(s) from a remote HDBaseT
receiver
All OUT : Connects to an IR emitter cable sends
IR signal which is received from all HDBaseT
receivers
4 IR IN
1-6 : Connects to IR receiver cable(s). Each IR IN
is associated with the IR OUT of the respective
HDBaseT receiver
5 Audio Outputs/ARC
Four Toslink outputs to connect speakers or
amplifiers for HDMI input audio de-embedding or
HDBT/HDMI output audio de-embedding, and
ARC audio output from the HDBaseT receivers
Default : HDBT 1-4 output audio de-embedding
6 Control
TCP/IP : Connects to a control device (e.g. PC) to
control the Matrix by GUI.
RS232 : Connects to a control device (e.g. PC) to
control the Matrix, or connect a third party device
controlled by RS232 commands
IR EYE : Connects to an IR receiver cable to
control the Matrix by the included IR remote
control
FIRMWARE : Micro USB port for firmware update
7 Power Jack Connects to the included power adapter