6
Figure 2: Receiver (RX)
1. Power LED
On when the Receiver is powered on
2. Link LED
Quick flash
: The TX and RX are pairing
Slow flash
: The TX and RX are transmitting data
Solid on
: The TX and RX are paired successfully or
the RX is updating firmware
Off
: The TX and RX are not paired or no signal
transmission after successful pairing
3. HDMI Out
Connects to your HDMI display
4. Power Jack
Connects to the included power adapter
5. Antenna (x2)
Connects to the included antenna
6. Pairing Button
Quick press
: Resets the RX to factory settings
Enter pairing mode
: Press and hold down the
pairing button on both the TX and RX for 3
seconds to enter pairing mode
7. Micro USB
Firmware update port
8. IR In
Connects to the included IR receiver cable
1 2
3
4
5
6
7
8
5
