11
FAQ & Solutions
Q:
What if my display shows “Waiting for
connection...”on the bottom right corner?
A:
1) Please check if the power adapters of
Transmitter (TX) and Receiver (RX) are
connected and powered on.
2) Check the network cable (CAT5e/6) is
firmly connected between the TX and RX.
Q:
The remote display says, “Please check the
TX input signal”:
A:
1) Please make sure the HDMI source device
is connected to the Transmitter (TX) unit
and powered on.
2) Use different HDMI cables.
3) If it's still not working, connect the HDMI
source device to the TV directly to see if
there’s a signal.
Q:
The extender is not working properly:
A:
1) Please check the cable lengths below:
- HDMI cables: Up to 2m
- Network cables (CAT5e/6): Up to 120m
2) Press the reset button on the TX/RX and
reconnect.
