7
Hardware Installation
1.
Power off all devices including your HDMI source
and HDMI display(s).
2.
Connect your HDMI source device to the HDBaseT
Extender/Splitter's HDMI Input connector with
an HDMI cable (HDMI cable not included).
3.
Connect your CAT cables between the HDBaseT
Extender/Splitter and HDBaseT Receivers.
4.
Connect an HDMI display to the HDMI Output
connector of the HDBaseT Extender/Splitter using
an HDMI cable (HDMI cable not included).
5.
Connect your HDMI display to the HDBaseT
Receiver's HDMI Out connector with an HDMI
cable (HDMI cable not included).
6.
Optional: Connect the IR Receiver Extension Cable
and the IR Blaster Extension Cable to the IR interface
port. This connection is needed only if you need
to control your HDMI devices from the remote
location. See IR Control, on page 10 and 11, for
proper IR connection.
7.
Plug the included power adapter into the HDBaseT
Extender/Splitter's Power Jack, then plug the
power adapter into a reliable power outlet.
Note
: The HDBaseT Receivers do not need power
adapters, they can be powered from the Extender/
Splitter over CAT cable with PoC technology.
8.
Power on your HDMI source device and HDMI
display. The extender is ready for use.