6
Figure 3: HDBaseT Receiver Layout
1
HDMI Out
Connects to an HDMI display
2
IR In
Connects to the IR Receiver Extension cable
3
IR Out
Connects to the IR Blaster Extension cable
4
DC 12V
12VDC power jack. Typically not needed, the
receivers are powered over CAT cable by the
Extender/Splitter using PoC
5
Power LED
Off: No power
On: Powered on
6
HDBT In
Connects to the Extender/Splitter's HDBaseT
Out using a CAT cable
HDCP LED: On when video signal contains
HDCP content, blinks when video signal is
transmitted without HDCP
Link LED: On when there is an HDBaseT link
between the Extender/Splitter and Receiver
