Godox X1T-O Instruction Manual Download Page 6

Setting the Transmitter

[Note 1]

Min. refers to the minimum power output value that can be set in M/Multi mode. 1/128 or 1/256 can be 
set according to C.Fn-05.
The minimum power output value is 1/128 and cannot be set to 1/256 for most of camera flashes. 
However, the value can change to 1/256 when using in combination with Godox strong power flashes 
e.g. AD600, etc.

Multi Flash Group ON/OFF Settings

1. Open the multi flash in the C.Fn Custom 

Functions (set C.Fn-04 as 1).

2. Short press the <GR> button to select the 

group. Click to choose downwardly and 
double-click to choose upwardly.

3. Short press the <MODE> Button to change 

the mode of selected group.

4. The current group’s mode will be changed by 

the order of on/-- (-- represents OFF, which 
means that the current group will not fire 
flashes in this mode).

- 32 -

- 31 -

Setting the Transmitter

Multi Flash Parameter Setting

1. Enter into multi flash mode before setting.
2. Press the <MODE> Button to enter multi 

flash parameter setting menu.

3. Then, P (output value), T (flash times) and H 

(flash frequency) will be displayed on the 
LCD panel.

4. Short press the <GR> Button to choose the 

settings. Turn the Select Dial to change the 
blinking setting amount. Continue to press 
the <GR> Button until all the amounts are 
set. Then, short press the <MODE> Button to 
exit.

Note:

 As flash times are restricted by flash output value and flash frequency, it might get 

automatic adjustment.  The times that transported to the receiver end are setting times, which is 
not related to the camera's shutter setting. To guarantee the normal times of stroboscopic times, 
please use the formula below to calculate the shutter speed.

Group Settings

1. Long press the <GR> Button to set all the groups that in the same modes 

simultaneously.

2. The settings of the groups which are in the same mode with the current group will 

blink. Turn the Select Dial to change the settings.

3. If the current group is in the M mode, all the other groups which are in the M mode will 

change their power output value simultaneously. The power output value is 
changeable from 1/1 full power to Min. power in 0.3 stop increments, until one of the

Number of Flashes / Firing Frequency = Shutter Speed

Summary of Contents for X1T-O














Reviews: