Godox X1T-O Instruction Manual Download Page 12

Attentions

1. Unable to trigger flash or camera shutter. Make sure batteries are installed correctly and 

Power Switch is turned on. Check if the transmitter and the receiver are set to the same 
channel, if the hotshoe mount or connection cable is well connected, or if the flash 
triggers are set to the correct mode. 

2. Camera shoots but does not focus. Check if the focus mode of the camera or lens is set 

to MF. If so, set it to AF.

3. Signal disturbance or shooting interference. Change a different channel on the device.
4. Operating distance limited or flash missing. Check if batteries are exhausted. If so, 

change them.

Caring for Flash Trigger

Avoid sudden drops.

 The device may fail to work after strong shocks, impacts, or 

excess stress. 

Keep dry.

 The product isn

'

t water-proof. Malfunction, rust, and corrosion may occur and 

go beyond repair if soaked in water or exposed to high humidity. 

Avoid sudden temperature changes.

 Condensation happens if sudden temperature 

changes such as the circumstance when taking the transceiver out of a building with 
higher temperature to outside in winter. Please put the transceiver in a handbag or 
plastic bag beforehand.

Keep away from strong magnetic field.

 The strong static or magnetic field produced 

by devices such as radio transmitters leads to malfunction. 

- 43 -

- 44 -

Technical Data

X1T-O

Olympus and Panasonic cameras 

Support for the cameras that have PC sync socket.

2.4G Wireless transmission

MSK

2*AA batteries

Yes

TTL

Yes

Yes

Yes, ±3 stops in 1/3 stop increments

Yes

Manual open

Yes (Setting on the camera)

Max. 5 groups (A/B/C/D/E)

>100m

32 

Model

Compatible Cameras

Builted-in remote system

Modulation mode

Power supply

Exposure Control

Manual flash

TTL autoflash

Multi flash

TTL Control

High-speed sync

Flash exposure compensation

Flash exposure lock

Focus assist

Second curtain sync

Wireless Flash

Controllable slave group

Transmission range (approx.)

Channel

Summary of Contents for X1T-O














Reviews: