2-Reflector diffuser
1-Instruction manual
Separately Sold Accessories
The product can be used in combination with the following accessories sold separately, so as to
achieve best photography effects:
X1C Wireless Flash Trigger, FT-16 Remote Control, Softbox, Beauty Dish, Fold up umbrella，
Snoots, Light stand, etc.
Installing Reflector (Other Accessories)
1. Rotate Accessory Locking Ring (2) counter-clockwise until it is loosen.
2. Insert the reflector into the Accessory Mount (1).
3. Rotate Accessory Locking Ring (2) clockwise to lock it up. Do not over-tighten.
Attaching Flash Tube
1. Remove the reflector or other accessories from the flash head.
2. Match the red dot on the base of the flash tube with the red dot in the Tube Socket (4). Push the
flash tube in until it is securely seated into the socket.
Connecting to a Power Pack
1. Before connecting, make sure that the power pack is turned off.
2. Plug one end of Power Cable into Power Socket (7) of the flash unit, and insert the other end
into the output socket of the power pack.
3. Turn on the power pack. Normally the flash unit will be fully charged and ready to work.
*The flash unit is not powered by itself, but draws power from Godox power pack PB960 (sold
