Godox witstro ad360II-c, Instruction Manual

Page: 12 / 39

With < ETTL > displayed on the LCD panel, press the camera’s < FEL > button. If the camera does
not have the < FEL > button, press the < > button.
1.
Focus the subject.
2.
Press the < FEL > button.
* Aim the subject at the center of the viewfinder and press < FEL > button.
* The camera flash will fire a preflash and the required flash output for the subject is retained
in memory.
* Each time the < FEL > button is pressed, a preflash will be fired and a new flash exposure
setting will be locked.
High-Speed Sync
High Speed Sync (FP flash) enables the flash to synchronize with all camera shutter speeds. This is
convenient when you want to use aperture priority for fill-flash portraits.
1、Press Function Button 4 < > so that < > is displayed.
2、Check that < > is displayed in the viewfinder.

If the subject is too far away and underexposure, the < > icon will blink in the
viewfinder. Move closer to the subject and try the FE lock again.

If < ETTL > is not displayed on the LCD panel, FE lock cannot be set.

If the subject is too small, FE lock might not be very effective.

If you set a shutter speed that is the same as or slower than the camera’s
maximum flash sync speed, < > will not be displayed in the viewfinder.

With high-speed sync, the faster the shutter speed, the shorter the effective flash
range.

To return to normal flash, press < > button again. Then < > will
disappear.