This describes wireless (multiple shooting) using manual flash. You can shoot with a different flash
output setting for each slave unit (firing group). Set all parameters on the master unit.
1、Setting the flash mode to <
M
>.
2、Setting the number of flash groups.
● When <
MENU 1
> is displayed, press the Function Button 2 <
> to set the groups to
fire.
● The setting changes as follows each time you press the button:
ALL（RATIO OFF）→
A/B（RATIO A：B）→
A/B/C（RATIO A：B：C）。
3、Setting flash output.
● Press Function Button 3 <
>. Turn the Select Dial to set the flash output of the
groups. Press <SET> button to confirm.
4、Taking the picture.
● Each group fires at the set flash ratio.
Setting <M> Flash Mode
You can directly operate the slave unit to manually set the manual flash or stroboscopic flash.
1、Setting the slave unit.
2、Setting flash mode to <
M
>.
● Press <
MODE
> button so that <
M
> is displayed.
● When ALL <
RATIO OFF
> is set, set A, B or C as the firing group for the slave units.
● To fire multiple slave units with the same flash output, select ALL <
RATIO OFF
> in step 2.
