● Set the manual flash output.
6、Multi: Manual Wireless Flash Shooting
1、Setting <
MULTI
> stroboscopic flash.
● Press <
MODE
> button so that <
MULTI
> is displayed.
● Setting the stroboscopic flash.
Wireless Flash Shooting: Radio (2.4G)
Transmission
Using a flash (master/slave) with a radio transmission wireless shooting function make it easy
to shoot with advanced wireless multiple flash lighting, in the same way as E-TTL II autoflash
shooting.
The basic relative position and operation range are as shown in the picture. You can then
perform wireless E-TTL II /ETTL autoflash shooting just by setting the master unit to <
ETTL
>.
Positioning and Operation Range (Example of wireless flash shooting)
● Autoflash Shooting with One Slave Unit
The firing frequency of stroboscopic flash during the optic transmission wireless shooting can be
set from 1Hz to 199Hz (settings from 250 Hz to 500 Hz are not available).
● Use the supplied mini stand to position the slave unit.
● Before shooting, perform a test flash and test shooting.
● The transmission distance might be shorter depending on the conditions such as
positioning of slave units, the surrounding environment and whether conditions.
