Godox V860 II, Instruction Manual

Page: 15 / 22

MENU2
Slave Unit Setting
Master Unit Setting
1
.
Wireless Settings
You can switch between normal flash and wireless flash. For normal
flash shooting, be sure to set the wireless setting to OFF.
Press < > button so that < >
or
< >
are displayed on
the LCD panel.
Press < > button so that < >
or
< >
are displayed on
the LCD panel.
2. Master Unit’s Flash OFF
When the master unit is set to OFF, only the slave units will fire a
flash.
Press Function Button 4 so
1
that < > is displayed
on the LCD panel.
Press Function Button 1
2
< > to control the
ON/OFF of the master unit.
< >：
The master unit flash
firing is ON.
< > ： The master unit flash
firing is OFF.
ON/OF
F
3. Setting the Communication Channel
If there are other wireless flash systems nearby, you can change the
channel IDs to prevent signal interference. The channel IDs of the
master unit and the slave unit(s) must be set to the same.
Press Function Button 4 so
1
that < > is displayed
on the LCD panel.
Press Function Button 1 so
2
that < > is displayed
on the LCD panel. Turn the
Select Dial to choose a
channel ID from 1 to 4.
Press the < SET > button to
3
confirm.
4. ETTL
：
Fully Automatic Wireless Flash Shooting
Using Automatic Wireless Flash with a Single Slave Unit
Master Unit Setting
1
●
Attach a V860IIC camera
flash on the camera and
set it as the master unit.
●
As a master unit, V860IIC
can control Canon
speedlites e.g. 580EXII,
600EX-RT via wireless.
MENU3
CH
Wireless Flash Shooting: Optic Transmission
This product supports wireless flash application and functions
as either a master or a slave unit. As a master unit, it can control
Canon speedlites e.g. 580EXII, 600EX-RT via wireless. As a slave
unit, it can receive wireless signals of Canon speedlites e.g.
580EXII, 600EX-RT and commanders of Canon cameras e.g.
7D/60D/600D.
● You can set up two to three slave groups for E-TTL II autoflash
shooting. With E-TTL II autoflash, you can easily create various
lighting effects.
● Any flash settings (of flash exposure compensation, high-speed
sync, FE lock, FEB, manual flash, Multi flash) on the master unit
will be automatically sent to the slave units. So the only thing you
need to do is to set the master unit to ETTL mode without any
operation for the slave units at all during the shooting.
● This flash can work in ETTL autoflash, M manual flash, and Multi
stroboscopic flash modes when set as a master unit.
Positioning and Operation Range
●
Even with multiple slave units, the master unit can control
all of them via wireless.
● In this user manual, “master unit” refers to the camera flash
on a camera and “slave unit” will be controlled by the
master unit.
Indoors
Outdoors
15m
(
49
.
2ft
)
10m
(
32
.
8ft
)
80°
8m ( 26 . 2ft ) 12m ( 39 . 4ft )
- 67 - - 68 -