Godox V860 II, Instruction Manual

Page: 11 / 22

MENU2
Slave Unit Setting
Master Unit Setting
Press < > button so that < >
or
< >
are displayed on
the LCD panel.
Press < > button so that < >
or
< >
are displayed on
the LCD panel.
2. Master Unit’s Flash OFF
When the master unit is set to OFF, only the slave units will fire a
flash.
Press Function Button 4 so
1
that < > is displayed
on the LCD panel.
Press Function Button 1
2
< > to control the
ON/OFF of the master unit.
< >：
The master unit flash
firing is ON.
< > ： The master unit flash
firing is OFF.
●
Even if the master unit
flash firing is disabled, it
still fires a preflash to
transmit wireless signals.
ON/OF
F
3. Setting the Communication Channel
If there are other wireless flash systems nearby, you can change the
channel IDs to prevent signal interference. The channel IDs of the
master unit and the slave unit(s) must be set to the same.
Press Function Button 4 so
1
that < > is displayed
on the LCD panel.
Press Function Button 1 so
2
that < > is displayed
on the LCD panel. Turn the
Select Dial to choose a
channel ID from 1 to 4.
Press the < SET > button to
3
confirm.
4. ETTL
：
Fully Automatic Wireless Flash Shooting
Using Automatic Wireless Flash with a Single Slave Unit
Master Unit Setting
1
●
Attach a V860IIC camera
flash on the camera and
set it as the master unit.
●
X1T-C can also be used as
master unit. X1T-C can
control V860IIC's ZOOM
value when the ZOOM is
adjusted to auto (A) mode.
Slave Unit Setting
2
●
Set the other camera flash
as the wireless slave Unit.
Check the communication
3
channel.
●
If the master unit and slave
unit(s) are set to a different
channel, set them to the
same channel. (Page 60)
Position the camera and
4
flashes.
●
Position the camera and
flashes as the picture
shows. (Page 57)
MENU3
CH
- 59 - - 60 -
1
.
Wireless Settings
You can switch between normal flash and wireless flash. For normal
flash shooting, be sure to set the wireless setting to OFF.