background image

固件升级

本机通过

USB

插座可进行固件升级。软件最新公告及说明将会发布在

官方网站上。

注:本品出厂不配

USB

升级线,请另行购买。普通的

USB

线可

使用,本产品

USB

口为

Micro USB 

接口。

兼容相机列表

本机可兼容以下佳能EOS系列的相机型号:

注:
1. 此表格仅列举目前已测试的相机型号,未涵盖所有佳能EOS
    系列相机。其他相机型号,用户可自行测试。
2. 本公司保留未来修改此表格内容的权利。

● 闪光灯在工作时,如发现异常,应立即关掉电源,查明原因。

● 灯体应避免震动,平时注意表面除尘。

● 灯体稍有发热为正常现象,无特别需要时,勿连续引闪。

● 闪光灯的所有维修概由本厂指定可供原厂配件之维修部负责。

● 

1

年保修,消耗品如灯管等,不在

1

年保修范围。

● 经发现,擅自检修此闪光灯的,将取消闪光灯之一年保修期,维修

需要收取相关费用。

● 如果本品出现故障或者被水淋湿,在专业人员维修后方可继续使

用。

● 如有技术更改,恕不另行通知。

维护保养

5D Mark III

5D Mark II

6D

7D

60D

50D

40D

30D

650D 600D 550D 500D 450D

400D Digital

1100D 1000D

1DX

Always keep this product dry. Do not use in rain or in damp 

conditions.

This product contains high-voltage electronic parts. Touching 

the high-voltage circuit inside it may result in electric shock. Do 

not disassemble. Should repairs become necessary, this 

product must be sent to an authorized maintenance center.

Stop using this product if it breaks open due to extrusion, falling 

or strong hit. Otherwise, electric shock may occur if you touch 

the electronic parts inside it.

Do not fire the flash directly into the eyes (especially those of 

babies) within short distances. Otherwise visual impairment 

may occur. When taking pictures for babies, keep the flash unit 

at least 1 meter (3.3 feet) away from them. Using bounce flash 

to reduce light intensity is also recommended.

Do not use the flash unit in the presence of flammable gases, 

chemicals and other similar materials. In certain circumstances, 

these materials may be sensitive to the strong light emitting 

from this flash unit and fire or electromagnetic interference may 

result. 

Do not leave or store the flash unit in places where the ambient 

temperature reads over 50°C (e.g. in automobile). Otherwise 

the electronic parts may be damaged.

Thank you for purchasing this product.

This V860IIC camera flash applies to Canon EOS series cameras 

and is compatible with E-TTL II autoflash. With this E-TTL II 

compatible flash, your shooting will become simpler. You can easily 

achieve a correct flash exposure even in complex light-changing 

environments. This camera flash features:

● 

GN60 (m ISO 100, @200mm). 22 steps from 1/1 to 1/128.

● 

Pro 2000mAh Li-ion Battery-max.1.5s recycle-650 full power pops.

● 

Fully support Canon E-TTL II camera flash. Workable as Master or 

Slave unit in a wireless flash group.

● 

Use dot-matrix LCD panel to make clear and convenient 

operations.

● 

With built-in 2.4GHz wireless remote system to support 

transmitting and receiving.

● 

Provided multiple functions, include HSS (up to 1/8000s), FEC, 

FEB, etc.

● 

Use optional FT-16S to adjust flash parameters & trigger the flash.

● 

Stable consistency and color temperature with good even lighting.

● 

Support with firmware upgrade.

For Your Safety

Foreword

-  41  -

-  42  -

Summary of Contents for V860 II























Reviews: