39
40
Firework Mode
20
DIM
Switch from AC Power Supply to V-Mount Battery Power
Supply
Note
：
If you install the V-mount battery before unplugging the power cord
，
and the
brightness value is set higher than the maximum brightness that the battery can be
turned on
，
then you switch to V-mount battery power supply by unplugging the power
cord, the light and the controller will automatically power off. The machine can only
resume mormal operation after reboot.
V-mount battery
14.8V(single)
14.8V(double)
26V(single)
14.8V+26V
26V(double)
linear
20%
40%
30%
50%
60%
S-curve
30%
43%
38%
48%
50%
exponential
50%
72%
63%
78%
84%
logarithmic
4%
8%
5%
10%
15%
Maximum Brightness in Different States
1.Do not cut off the power immediately
when the product is turned off after a long
period of operation. The controller will
automatically enter cooling state, and
"System cooling, do not power off immedi-
ately " is displayed on the panel. You can
cut off the power after system cooling is
done and the screen turns black.
2. When the connecting cord is not
correctly connected to the light or control-
ler, a separated icon of connecting cord
and device is displayed on the panel.
Please check the connecting ports of the
controller and light.
FX
/
Status Description
Long Term Use
Connecting Cord Issue
3. Unplug the power cord and install V-mount battery then turn on the product.
CCT mode: Maximum Brightness (%) in Auto Cooling Mode or High-Speed Cooling Mode
when supplied by V-mount battery
Tip: Long press <
> button for 3 seconds to lock or unlock.
