Multi-connected
DMX512
Power Supply
1. AC Power Supply
AC100V-240V
Note: Please press the latch button when installing or disassembling the power cord
and connecting cord.
30
29
2. Mounted on the tripod
Adjust the light body to a proper angle,
rotate the screw of sleeve knob to install
the light body on the tripod, then rotate
the screw of sleeve knob to fix the light
body on the tripod. The inclination angle
of the light body could be adjusted by
loosening the bracket angle adjustment
handle and then screwing down the
handle afterwards.
Note: The tripod belongs to separately
sold accessories.
Tips: Press the handle direction adjust-
ment button to adjust the handle by 360°.
3. Mounted on the light stand
Loosen the handle of the controller
clamp, then insert the light stand and
rotate the handle to tighten.Finally, insert
the V port of the controller into the clamp
slot.
Tip: Press and hold the mount fixing
pusher can easily remove the controller.
4. Installation and disassembly
the lamp cover
Installation: Press the Mount Fixing
pusher top-down, put the lamp cover on
Bowens Mount, and rotate clockwise to
tighten it.
Disassembly: Press the Mount Fixing
pusher top-down, then rotate counter-
clockwise to remove it.
Note: Make sure to remove the lamp
cover before use to avoid overheating
damage. Put on the lamp cover to protect
the lamp when not in use.
5. Installation and disassembly
the standard reflector
Installation: Press the Mount Fixing
pusher top-down, put the standard
reflector on Bowens Mount, and rotate
clockwise to tighten it.
Disassembly: Press the Mount Fixing
pusher top-down, then rotate counter-
clockwise to remove it.
Connected to DMX Controller
The Connection operation diagram of Controller and DMX Controller is as follows:
Spring Latch
