11
©Godiva Ltd. Our policy is one of continuous development. We therefore reserve the
right to amend specifications without notice or obligation.
LUBRICANTS
Compressor
– Tempest 3
Recommended:
Screw compressor oil in
compliance with ISO Viscosity grade 32 to 46.
Alternative:
SAE
10W/40
automotive
multigrade oil.
Capacity 3.5 litres - (approximately 4.0 litres
with filter change)
Compressor
– Tempest 6
Recommended:
Screw compressor oil in
compliance with ISO Viscosity grade 32 to 46.
Alternative:
SAE
10W/40
automotive
multigrade oil.
Capacity 4.5 litres - (approximately 6.0 litres
with filter change)
Pump Gearbox
Capacity 1.2 litres approximately
Recommended:
BP Energol GR XP 68 or
similar
Pump Bearing Housing
Capacity 1.0 litres approximately.
Recommended:
10W/40 or 15W/40 Multi-
grade engine oil.
RECOMMENDED FOAM AGENTS
Hale FoamLogix Models
2.1A,
3.3 or 5.0
can be used with the foam concentrates
specified on the Hale Foam Proportioning System Foam Concentrate Compatibility List
provided at the rear of this manual, Hale Bulletin #650, Rev 32 , 7-17-07.
The foam concentrates in the list have been tested by Hale Products to ensure
compatibility with FoamLogix models
2.1A,
3.3 or 5.0.
This information is intended to
assist the end user in selecting compatible foam concentrate(s) but is not a
determination of fire fighting efficiency. Always consult local application and
environmental regulations before selecting a foam concentrate and refer to the
FoamLogix user manual for additional information.
Note:
Valid from October 2008.
Please contact your Hale representative if your foam is
not listed.
