27
©Godiva Ltd. Our policy is one of continuous development. We therefore reserve the
right to amend specifications without notice or obligation.
The oil drain points (pump bearing housing, gearbox and compressor) are located at the
front of the mounting platform, see page 23.
Fill the gearbox until the oil flows from the oil level check point. This is the only accurate
method of checking that the correct amount of oil has been added to the gearbox, as it
allows for different sizes of gear ratios. Approximate capacity is 1.2 litres.
Foam Injection Point
Foam
injection
point
–
connect tubing suitable for
22.5 bar pressure
