3.5 Error Alerts
In the event of a problem that prevents normal functioning of the printer, you will see an error message on LCD
screen and hear some beep signals. Please refer to below table for the error alerts.
Operation Panel
Status
Type
Beeps
Description
Solution
Print Head Error
2 x 4 beeps
The printing mechanism is
not
correctly closed.
Open the print
mechanism and
close it again.
Print Head Error
None
High temperature
at the print head.
Once the print head
has cooled down, the
printer switches to
standby mode.
Media Error
2 x 3 beeps
No ribbon is
installed and the
printer displays an
error.
Make sure that the
printer is set to direct
thermal printing
mode.
The ribbon is
finished or the
label supply hub is
not mov ing.
Replace the ribbon
roll.
Media Error
2 x 2 beeps
No paper is detected.
Make sure that the
label sensor is
Positioned correctly. If
the sensor still does not
detect the paper,
OPERATION
TOUCH PANEL
LCD TOUCH PANEL
POWER BUTTON
FEED BUTTON
