Below are general descriptions of setting items.
Darkness
Default: 15
Set the darkness of printing result. The setting value is from 0
to 19 and the default value is 15.
Speed
Set the speed of printing.
Adjust Stop Position
Default: 0
Set the stop position of printing. The setting value is from 0 to
10.
*Note: When printing with label format that is created based
on old series printers, please change this setting to achieve
the compatibility. Set the value to 3 when printing with cutter;
set the value to 4 when printing with stripper or doing normal
printing.
Printhead Position
Default: 0
Set the position of print head when printing. The setting value
is from -100 to 100.
Printing mode
Default: Thermal Transfer
Thermal Transfer:
when printing, a ribbon must be installed
to transfer the print contents onto the media.
Direct Thermal:
when printing, no ribbon is necessary; it only
requires direct thermal media.
Option Setup
Default: Option OFF
Strip Mode:
turn on the stripper function
Cutter Mode:
turn on the cutter function
Applicator Mode:
turn on the applicator function
None:
select this to turn off the stripper and cutter functions.
Sensor Setup
Default:
Gap paper
Black Mark:
for label or plain paper with black mark in the
back
Gap:
for labels with liner and gap, or hang tags. The default is
set to be gap paper.
Continuous:
for continuous paper
Baud Rate:
Default - 9600 bits
4800 bits
9600 bits
19200 bits
38400 bits
57600 bits
115200 bits
Parity:
Default - None Parity
None Parity
Odd Parity
Even Parity
Data Bits:
Default - 8 bits
7 bits
8 bits
COM Port Set
Stop Bits:
Default - 1 bit
1 bits
2 bits
Auto Sensor
Default: Auto Mode
Auto Mode:
auto sense the label type (black mark, gap &
plain Mpaper) and length
Gap Mode:
detects gap paper
Black Mark Mode:
detects black mark label
EZPi-1000 User’s Manual
21
