2. Printer Installation
This printer model has the following print modes:
Thermal
Transfer (TT)
When printing, ribbon must be installed to transfer the print contents onto the
media.
Direct Thermal
(DT)
When printing, no ribbon is necessary; it only requires direct thermal media.
Please check the specific print mode, and then go into the Setting Mode after power on the
printer
。
2-1. Ribbon Installation
1.
Place the printer on a
horizontal surface, and
open the top cover by
pressing the Cover
Open Buttons on both
sides.
2.
Loosen and then lift the
upper print mechanism
by pressing the locking
tenons.
3.
Place a new ribbon roll
onto the ribbon supply
shaft.
EZPi-1000 User’s Manual
11
