EZ-DT-4 EZ-DT-2
5.
Turn the
printer
around and
tighten
screws to
fix the
Stripper in
location.
5.
Loose the
screw of
Bottom Case
Cover and
open it.
6.
Unlock the
Bottom
Case
Cover to
see the
main board
of printer.
【
Note
】
You can also use coin or screwdriver to
open the
bottom case cover.
6.
Tighten the
screws to fix
the Stripper
in location.
7.
Plug the connector into the
main board.
【
Note
】
There are 2 sockets on the
main board, one is for stripper
installation, another is for cutter
installation. Before plugging
the connector into socket,
please check the pin first.
8.
Lock the Bottom Case
Cover. (For EZ-DT-2,
please tighten the screw of
Bottom Case Cover)
9.
Turn the printer back to
proceed to the label
installation.
EZ-DT-2/EZ-DT-4 User’s Manual
16
Summary of Contents for EZ-DT-2
