8
E, Bit -Mapped font (not included Asia font)
name: The name of the graphic, form and Bit -Mapped font
Description
: Able to delete individual files or erase entire flash memory.
Example
: ~MDELG,Bus ; the graphic “Bus” will be deleted
11. Rotate printing
Syntax
: ~Rx
Parameter
: x = label width; from 1 to 104 (mm)
Description
: Rotate the label format 180-degrees when printing (refer page 18). To return to the original print
direction, set the x value greater than 104 (ie. ~R105).
12. Print the available space and data name in the memory
Syntax
: ~Xn
Parameter
: n = 1, print label format names and available space in memory.
n = 2, print graphic names and available space in memory.
n = 3, print Bit-Mapped font names and available space in memory.
n = 4, print the name of the label formats, graphics, fonts, and available space in memory.
n = 5, print Asia font names and available space in memory
n = 6, feed back the total printed length through the printer’s serial port
Description
: Print the available space in the memory card (unit: bytes)
13. Acknowledge from RS-232
Syntax
: ~Kn
Pararmeter
: n = 0, disable.
n = 1, enable.
Return value
: Y
?
Description
: Acknowledge a “Y(0D0A)” from RS-232 back to host each printing label.
14. Row Offset Adjustment
Syntax
: ~Q±n
Pararmeter
: n=-36 ~ +36
Return value
: none
Description
: If the printing doed not appear in the same place on every label, this command instructs the printer
to print label fn increments above the position the format specifies, and –n decrements
below the position the format specifies.
