Godex EZ-4TKP, Programing Manual

Page: 6 / 23

5
EX.
^Q25,4,3+
(x=25, y=4, z=3+) mm
^Q25,4,3 -
(x=25, y=4, z=3-) m m
y
paper feed
direction
x
^Qx,y,z+
^Q,x,y,0+
^Q,x,y,z- x
x
Description : Set label size (length, gap length, [plain paper feed length])
5. Speed setting
Syntax : ^Sx
Parameter : x=1 to 4 (inch/sec)
Description : Set printing speed
6. Number of copies per label
Syntax : ^Cx
Parameter : X = 0 ~ 32767
Description : Number of copies of the same label (refer page 17)
7. Row column adjustment
Syntax : ^Rx
Parameter : x = 0 ~ 399 dots
Response : None
Description : Set left margin
8. Label format begin sign
Syntax : ^L
Parameter : None
Descripton : Set label begin sign
9. Stripper sensor
Syntax : ^Ox
Parameter : x = 0 , stripper disable.
x = 1 , stripper enable
Description : Enable or disable the stripper sensor. When you use this command, it should be matched with^Ex.
(refer page 16)
10. Download label format
Syntax : ^Fname
data
Parameter : Name = name of label form at (up to 20 characters)
Data = the data containing the label formatting command for this stored format
Description : Download label format into memory. After the download is finished, the printer will beep once (refer
page 19).
^Fname
:
:
^L
:
:
E
Control/Setup command
Label format command
data
Same name inspection : If you use the same file name, the printer will print ”REPEAT FILE
NAME”, and the download will be not be accepted.
11. Recall label format
Syntax : ^Kname
Parameter : Name = name of recall label format (up tp 20 characters)
Description : Recall label format from external format (refer page 19)