2-6. Cutter
We suggest that the minimum label height be more than 35 mm. If you need any help in installation and
maintenance, please consult your supplier or dealer.
Rotary Cutter Adjustment
1.
There are two adjustable opening showed as
arrow “A” on the cutter.
2.
The paper jam may cause the cutter work
improperly, power off the printer.
3.
Use #M3 Hex Key insert into the opening “A”
and turn clockwise. The blade of cutter should
be opened, then remove the paper inside the
cutter.
4.
After the paper jam problem is eliminated, power
on the printer, at this moment, the cutter will
regress automatically to cutting position.
A
12
