Godex C-650Plus II, User Manual

Page: 20 / 48

User Manual
15
Printer Setup
The Printer Setup is used to configure the printer parameters and to print a Self Test page, to check the
settings and the printer installation, and to perform the Print Offset Tuning.
The default configuration of this printer matches most of the commonly used environments, but it may be
necessary to change some printer parameters.
With this printer you print the forms for the setup, you fill them in, and then you insert them back into the
printer for reading.
Once the printer reads the form, the new values are set.
The following is the complete description of the Setup Procedure.
Entering the Printer Setup Mode
To enter the Printer Setup Mode press and hold the READY key pressed for at least 1 second while
powering the printer on. The printer enters the Setup Mode.
The leds ST1, ST2 and READY are unlit, the DATA led is flashing.
You can now:
Print the Self Test. See
“
Printing the Self Test
” later in this manual.
Print one of the Printer Setup Forms (Configuration Menu or Program1
– Program2 – Program 3 - Program4
Menu) or the Offset Tuning Form. See
“
Printing the Printer Setup Forms
” later in this manual.
Insert a filled-in Printer Setup Form to set the corresponding Setup values.