Godex AG3000, User Manual

Page: 34 / 46

34
Select “3” to check whether the cylinder receives enough air pressure to go down and up.
Select “4” to check printer output (the printer will print one label if the input buffer is loaded)
You exit this menu with either the LEFT arrow (back to the SERVIS1 menu), the DOWN arrow
(further to the language settings) or the START button (back to the START menu).
5.3.7 The “LANGUAGE” menu
Image 1: in this menu you can select
any language included in the
AG3000 firmware.
1) You access this menu from the
MANUAL menu by selecting the
DOWN arrow key.
2) Use the arrow RIGHT key to select a
language
3) Leave this menu by selecting the
arrow LEFT key (back to the
MANUAL menu) or the START button
(back to the START menu).
CHOOSE LANGUAGE
EN